- `setting.UI.Notification.EventSourceUpdateTime` is by default 10
seconds, which adds an 10 second delay before the test succeeds.
- Lower the interval to reduce it to at most 3 second delay (the code
only send events when they are at least 2 seconds old 🤷).
(cherry picked from commit c0b4a064e9)
It does not pollute the output because they go to sqlite-log/gitea.log
and it may provide clues for debugging. When trying to figure out a
problem in production, Debug is likely to be used but in a development
environment a very fine grain log is the most useful. If that's really
too much noise, the lines can be trimmed by removing all those with [T].
(cherry picked from commit 666b02eb9d)
(cherry picked from commit b69e4d3058)
(cherry picked from commit e11dcc60f2)
use backticks to avoid backslash
(cherry picked from commit 34212791ee)
(cherry picked from commit bde9473c69)
(cherry picked from commit d4deb43084)
(cherry picked from commit 08e91649b0)
(cherry picked from commit 2b988e5415)
[TESTS] auth LinkAccount test coverage (squash)
(cherry picked from commit a2b2e3066b)
(cherry picked from commit 841d1b5073)
(cherry picked from commit 35da630ad8)
(cherry picked from commit caf2dc4fa7)
(cherry picked from commit c1d14c5fff)
(cherry picked from commit e0e8aabc98)
(cherry picked from commit 392a415070)
(cherry picked from commit c7cf1307ca)
(cherry picked from commit 93b13d092b)
[TESTS] createUser via the user model helper for integration tests (squash)
(cherry picked from commit 6ff2383952)
(cherry picked from commit de2a6fe8c3)
(cherry picked from commit 398a6ab072)
(cherry picked from commit 16abc89780)
(cherry picked from commit 20b5669269)
(cherry picked from commit 1574643a6a)
Update semantic version according to specification
(cherry picked from commit 22510f4130)
Mise à jour de 'Makefile'
(cherry picked from commit c3d85d8409)
(cherry picked from commit 5ea2309851)
(cherry picked from commit ec5217b9d1)
(cherry picked from commit 14f08e364b)
(cherry picked from commit b4465c67b8)
[API] [SEMVER] replace number with version
(cherry picked from commit fba48e6497)
(cherry picked from commit 532ec5d878)
[API] [SEMVER] [v1.20] less is replaced by css
(cherry picked from commit 01ca3a4f42)
(cherry picked from commit 1d928c3ab2)
(cherry picked from commit a39dc804cd)
Conflicts:
webpack.config.js
(cherry picked from commit adc68578b3)
(cherry picked from commit 9b8d98475f)
(cherry picked from commit 2516103974)
(cherry picked from commit 18e6287963)
(cherry picked from commit e9694e67ab)
(cherry picked from commit a9763edaf0)
(cherry picked from commit e2b550f4fb)
(cherry picked from commit 2edac36701)
[API] Forgejo API /api/forgejo/v1 (squash)
Update semver as v1.20 is entering release candidate mode
(cherry picked from commit 4995098ec3)
(cherry picked from commit 578ccfdd27)
(cherry picked from commit 1bf6ac0952)
(cherry picked from commit 2fe16b2bfe)
(cherry picked from commit 7cd9d027ee)
(cherry picked from commit eaed4be2ae)
(cherry picked from commit cc94f3115f)
f92e0a4018 added minio to the tests/pgsql.ini.tmpl and Forgejo CI does
not run a minio server. It will if there are external storage related
changes at some point but it is not the case now so it is not worth
the burden.
(cherry picked from commit 4cfbf4718d)
(cherry picked from commit 9bd644d601)
(cherry picked from commit 604636c7c4)
(cherry picked from commit 341cdb8540)
(cherry picked from commit 57bdc91de5)
(cherry picked from commit c6ec6517b4)
(cherry picked from commit 2f03fc1b29)
(cherry picked from commit aaecd10966)
(cherry picked from commit 7025ff7b06)
(cherry picked from commit 15e6485ae1)
(cherry picked from commit 5f7b23c659)
(cherry picked from commit a74d7ce6c5)
(cherry picked from commit f552e2fc56)
(cherry picked from commit 9fa4a90baa)
(cherry picked from commit a8be33da60)
(cherry picked from commit 205f7897aa)
(cherry picked from commit a6074d765d)
(cherry picked from commit b85c999109)
(cherry picked from commit e370e412e8)
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#25934
Add `ignoreGlobal` parameter to `reqUnitAccess` and only check global
disabled units when `ignoreGlobal` is true. So the org-level projects
and user-level projects won't be affected by global disabled
`repo.projects` unit.
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #10912
And there are many new tests to cover the CLI behavior
There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.
----
## ⚠️ BREAKING ⚠️
This PR does it best to avoid breaking anything. The major changes are:
* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
* Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
* After: only `./gitea subcmd --sub-opt` could be used
* The global options like `--config` are not affected
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Fix#25558
Extract from #22743
This PR added a repository's check when creating/deleting branches via
API. Mirror repository and archive repository cannot do that.
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves#25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
Fix#21072
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
