Confine the search menu to be at most the width of the page, or 80% of
the viewport width, whichever is smaller. To do this, introduce a new
`--container-width` variable for the descendant elements of
`.ui.container` to be able to access.
Also update the relevant e2e test: add a long 'lorem ipsum' page, add a
search for it, parameterize the width.
Replace wiki page filenames with page titles in the search results,
fixing the problem with them showing unreadable URI-encoded names.
(cherry picked from commit fc31fa0eeb)
Change word order for issue comment actions
- An attempt to address https://codeberg.org/forgejo/forgejo/issues/2650
Org team permissions improvements
- consistency: added missing dot
- clarity: explain what external units mean
- use dedicated keys to explain the permissions.
- split in read/write permissions
- use explicit labels for accessibility
- ext_wiki.desc and ext_issues.desc are no longer in use.
- allow running with multiple workers (tested with up to four workers locally which
didn't show signs of flakiness)
- prevent race condition with webauthn tests (running them in parallel
on the same user could prevent another test from logging in)
- fix flakiness on CI action status (Chromium sometimes needs a long
time to fill the href field, firefox is always faster)
This reverts commit e8585eff5c.
- For WebAuthn Credential level 3, the `backup_eligible` and
`backup_state` flags are checked if they are consistent with the values
given on login. Forgejo never stored this data, so add a database
migration that makes all webauthn credentials 'legacy' and on the next
first use capture the values of `backup_eligible` and `backup_state`.
As suggested in https://github.com/go-webauthn/webauthn/discussions/219#discussioncomment-10429662
- Adds unit tests.
- Add E2E test.
- when the PR title has the maximum length, the WIP toggle switch does nothing
- work around this by slightly reducing the max input size (- 10 characters for eventually long prefixes)
- test WIP toggling edge case in playwright
fix(e2e): increase timeouts
A look at recent runs suggests they should be increased globally. The timeouts in the config file have no timeout by default.
includes:
- easier repo declaration for playwright tests by @Gusted
- full backend build for pushing Git repos by @Gusted
- playwright testing (which fails with the current diff algorithm, but
passes with the new)
- disable eslint rule for conditional expect, because it defeats the
purpose (working around it would result in much more complex test code
in our cases)
- adds a header to indicate creating a new rule
- test that header is different between new and edit form
- consistently avoids colons in the form
- excludes some accessibility checks that require a global solution for
forms
UX/Translation changes:
- new teams: remove redundant tooltips that don't add meaningful information
- move general information to table fieldset
- new teams: rename "general" to "custom" access for clarity
- new teams: show labels beside options on mobile
Accessibility:
- semantic form elements allow easier navigation (fieldset, mostly)
- improve better labelling of new teams table
- fix accessibility scan issues
- TODO: the parts that "disable" form elements were not yet touched and
are not really accessible to screenreaders
Technical:
- replace two JavaScript solutions with one CSS standard
- implement a simpler grid (.simple-grid)
- simplify markup
- remove some webhook settings specific CSS
Testing:
- check more form content for accessibility issues
- but exclude tooltips from the scan :(
- reuse existing form tests from previous PR
Modifies forms:
- (new) org team
- (new) repo webhook
- (new) repo protected branch
The forms are not completely rewritten to semantic HTML yet. The focus
of this change was on standard elements, some custom solutions were left
untouched for now.
- swaps the order fo permission radio buttons as per https://codeberg.org/forgejo/forgejo/issues/4983
- uses fieldsets to group related inputs
- ensures consistent styling across forms
- can be improved later, e.g. using horizontal lines between sections
- fixes: previous font size of labels was smaller than the font size of the help text
- help text are now part of the label, clicking them now also activates the input
- drop unused CSS (no required checkboxes in grouped class remain)
- playwright testing:
- move login boilerplate to utils
- automated form accessibility checking
- allow defining the scope, because legacy parts of the forms are not yet accessible
- assert some CSS properties that should not be overriden
- the Makefile adjustment was necessary, because eslint scanned some internal files in the tests/e2e/reports directory
Now that my colleague just posted a wonderful blog post https://blog.datalad.org/posts/forgejo-runner-podman-deployment/ on forgejo runner, some time I will try to add that damn codespell action to work on CI here ;) meanwhile some typos managed to sneak in and this PR should address them (one change might be functional in a test -- not sure if would cause a fail or not)
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4857
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
- Add https://github.com/playwright-community/eslint-plugin-playwright
as a linter for the playwright tests.
- `no-networkidle` and `no-conditional-in-test` are disabled as fixing
those doesn't seem to really improve testing quality for our use case.
- Some non-recommended linters are enabled to ensure consistency (the
prefer rules).
- Currently if you want to update the milestone of an issue or pull
request, your whole page will be reloaded to reflect the newly set
milestone. This is quite unecessary, as only the milestone text is
updated and a new timeline event is added.
- This patch converts the milestone section in the issue/pull request
sidebar to use HTMX, so it becomes a progressive element and avoids
reloading the whole page to update the milestone.
- The update of the milestone section itself is quite straightforward
and nothing special is happening. To support adding new timeline events,
a new element `#insert-timeline` is conviently placed after the last
timeline event, which can be used with
[`hx-swap-oob`](https://htmx.org/attributes/hx-swap-oob/) to position
new timeline events before that element.
- Adds E2E test.
- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
Closes#2797
I'm aware of https://github.com/go-gitea/gitea/pull/28163 exists, but since I had it laying around on my drive and collecting dust, I might as well open a PR for it if anyone wants the feature a bit sooner than waiting for upstream to release it or to be a forgejo "native" implementation.
This PR Contains:
- Support for the `workflow_dispatch` trigger
- Inputs: boolean, string, number, choice
Things still to be done:
- [x] API Endpoint `/api/v1/<org>/<repo>/actions/workflows/<workflow id>/dispatches`
- ~~Fixing some UI bugs I had no time figuring out, like why dropdown/choice inputs's menu's behave weirdly~~ Unrelated visual bug with dropdowns inside dropdowns
- [x] Fix bug where opening the branch selection submits the form
- [x] Limit on inputs to render/process
Things not in this PR:
- Inputs: environment (First need support for environments in forgejo)
Things needed to test this:
- A patch for https://code.forgejo.org/forgejo/runner to actually consider the inputs inside the workflow.
~~One possible patch can be seen here: https://code.forgejo.org/Mai-Lapyst/runner/src/branch/support-workflow-inputs~~
[PR](https://code.forgejo.org/forgejo/runner/pulls/199)
![image](/attachments/2db50c9e-898f-41cb-b698-43edeefd2573)
## Testing
- Checkout PR
- Setup new development runner with [this PR](https://code.forgejo.org/forgejo/runner/pulls/199)
- Create a repo with a workflow (see below)
- Go to the actions tab, select the workflow and see the notice as in the screenshot above
- Use the button + dropdown to run the workflow
- Try also running it via the api using the `` endpoint
- ...
- Profit!
<details>
<summary>Example workflow</summary>
```yaml
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log Level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
number1_default:
description: 'Number w. default'
default: '100'
type: number
number2:
description: 'Number w/o. default'
type: number
string1_default:
description: 'String w. default'
default: 'Hello world'
type: string
string2:
description: 'String w/o. default'
required: true
type: string
jobs:
test:
runs-on: docker
steps:
- uses: actions/checkout@v3
- run: whoami
- run: cat /etc/issue
- run: uname -a
- run: date
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.tags }}
- env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- run: echo "abc"
```
</details>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3334
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>